5E-DMA3000 Direct Mercury Analyzer
Description
Computer
Integrated Catalytic Amalgamation Tube
Low Pressure Mercury Lamp
Sample Boat
Sample Holder
Operation Principle:
Sample is dried by heating and burnt (pyrolysis) in oxygen or air. Its decomposed product is oxidized by the high temperature catalyst carried via oxygen. Meanwhile, interferent like halogen, nitric oxides, and sulfur oxides are absorbed by catalyst. Moisture is exhausted by pneumatic truncation, and the rest of decomposed product is further conveyed to sub-nanometer Hg-trap. Mercury atoms are selectively captured, and experience secondary atomization by heating Hg-trap. Flowing oxygen carries mercury atoms into the cold atomic absorption detector (253.7nm) for determination, and the total mercury content in the sample is directly calculated by the software.
Features:Wide Applicability
Suitable for solid and liquid samples, Able to detect samples in 6 different levels, 0.005ng-1500ng.
High Efficiency
Single test only takes 2-4mins, one batch includes 45 samples, and emergency samples can be inserted at any time.
Easy Operation
Weigh sample and place it on auto feeder without digestion. Complete analysis with just one click on Start key.
Splendid Repeatability & AccuracyIntegrated catalytic-amalgamation tube ensures measurement repeatability; composite catalytic agent of high efficiency guarantees the accuracy of test results.
Low Cost
No need for dehydration consumables, consumable cost is 70% lower than the traditional method.
Eco-friendly
No harmful chemicals are used in the whole analysis process. The exhaust gas produced by the analysis is effectively absorbed.
Specifications
Model | 5E-DMA3000 |
Conforms to Method | EPA 7473, ASTM D6722, ASTM D7623, GB/T 5009.17, GB/T 31947 |
Principle | Pyrolysis-Mercury Amalgamation-Cold Atomic Absorption |
Max Sample QTY | 1500mg(Solid) 1500μL(Liquid) |
Optical Source | Low-pressure Mercury Lamp |
Wave Length | 253.7nm |
Detector | Double UV Photodetector |
Repeatability | RSD<1% @1ng Hg |
Analysis Time | 2-4mins(depends on samples) |
Detection Limit | 0.001 ng Hg |
Working Range | 0.005ng-1500ng |
Analysis Method | Adjustable according to samples |
Carrier Gas | Oxygen(>99.5%) or compressed air |
Energy Consumption | Peak<2200W, standby<100W |
Calibration | Standard Solution or CRM |
Power Supply | AC110/220V, 50/60Hz |
Weight (kg) | 40kg |
Dimensions (L x W x H) | 610mmx505mmx350 mm |